Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13671515

- Product Categories
- Friendly Links
- home > Supply > Guangdong epoxy AB glue | Poly Li brand high-end acrylic AB glue factory since the sales
Information Name: | Guangdong epoxy AB glue | Poly Li brand high-end acrylic AB glue factory since the sales |
Published: | 2015-04-07 |
Validity: | 720 |
Specifications: | 1 |
Quantity: | 100000.00 |
Price Description: | |
Detailed Product Description: | Introduction 1. Model: JL-213-2AB 2. Product attributes: Epoxy 3. Product Specifications: AB-component 4. The ratio: A: B = 3: 1 product features high transparency, good high-gloss surface effect, strong adhesion, suitable for large area Epoxy, no watermarks, long-time anti-yellowing, low viscosity, easy to operate, you can use longer. Application Scope Crystal album, photo crystal, crystal picture frames, glass, metal, badges, buttons, crafts, jewelry, signs, solar panels and other large products Epoxy. Product Overview main agent mixing ratio: 300g hardener: 100g product viscosity main agent: 3500-4000cps hardener: 85-95cps main agent Appearance: Clear liquid hardener: transparent liquid product gravity main agent: 1.12 hardener: 0.8 Physics Characteristics hardening time 16 hours at room temperature to fully cure the adhesive strength 145 ~ 165 (kg / cm2) Flexural strength 235 ~ 245 (kg / cm 2) shear strength of 95 ~ 115 (kg / cm 2) heat intensity 85 ℃ hardness 75 ~ 80 (SHORED ) surface impedance 1 × 1014 (Ω / cm2) impedance volume 3 × 1013 (Ω / cm2) above the dielectric constant of 4.2 breakdown voltage 22KV (LV / mm) can be used time 100g × 25 ℃ 45 minutes at room temperature below 25 ℃ curing time extension If the curing time is shortened. Instructions 1, the product points A, B component, mixing ratio of the prompts surface label product packaging, mixing ratio by weight, non-volume ratio than or container. 2, when the low temperature before mixing A glue can be heated to about 60 ℃, helps to speed up anti-foaming. 3, after mixing, stir required (must follow the same direction stirring), there would be ineffective as the status of the product surface. 4, before dispensing the surface needs to be cleaned of dust and other impurities, otherwise it will affect the adhesion of the product. 5, the product transparency, anti-aging, high-gloss, high hardness (PS), good flexibility. Shelf life of six months, expired after passing the test, you can continue to use. Packing each set of 20kg, which contains the main agent 15kg / barrel, hardener 5kg / barrel. |
Admin>>>
You are the 14208 visitor
Copyright © GuangDong ICP No. 10089450, Adhesive Products Co., Ltd., Dongguan City, cohesion All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 14208 visitor
Copyright © GuangDong ICP No. 10089450, Adhesive Products Co., Ltd., Dongguan City, cohesion All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility